Tried with Mapulse
Used in a real Mapulse session.
Tried with MapulseApple Watch
Apple Watch models paired with an iPhone.
Tried with Mapulse. The route Mapulse has validated in a real run. The Apple Watch can’t broadcast its HR over Bluetooth: the Mapulse app on your wrist sends it. Real sessions in October 2026.
On the iPhone, just once
- Open the Watch app, tap “My Watch”, then “Apps”.
- Under “Available Apps”, tap “Install” next to Mapulse. It may already be there.
Before every run
- In “Prepare a session”, choose the “Apple Watch” source.
- Start the session on your phone.
- On your watch, open Mapulse and tap “Start”: sharing opens with the first signal.
Good to know
- Don’t look for your Apple Watch on the Mapulse Bluetooth screen: it will never appear there.
- Apple’s Workout app alone isn’t enough: its HR only arrives after the run.
Sources: Apple, get apps on Apple Watch
Tried with MapulseSamsung Galaxy Watch
Galaxy Watch 4 and later, Watch Ultra, Watch FE, up to date.
Tried with Mapulse. Galaxy Watch 8 tried in a session with the Mapulse app on the wrist: its HR reached Mapulse on both phone systems. Samsung doesn’t broadcast HR by itself: without the app, the watch stays invisible to Mapulse. Real sessions in October 2026.
On the watch, just once
- Your watch must have been set up once with Samsung’s Galaxy Wearable app. It doesn’t install on every phone.
- Install Mapulse from your watch’s store.
- Open it and accept its permissions (sensors, Bluetooth).
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- The Mapulse app needs your watch’s latest update: install it in Galaxy Wearable before your run.
- Samsung puts apps to sleep when the watch screen turns off: do a long test before your run.
Tried with MapulseCOROS
Recent models, for example PACE 2, PACE 3, PACE Pro, APEX 2, APEX 2 Pro, VERTIX 2.
Tried with Mapulse. PACE Pro tried with Mapulse. The rest comes from COROS documentation. Once the watch is added, it reconnects as soon as broadcasting is on. Real sessions in October 2026.
On the watch
- From the watch face, hold the BACK button to open the Toolbox.
- Choose “Broadcast HR”.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- According to COROS, the watch only accepts one connection while broadcasting. If it doesn’t appear, close the COROS app on your phone.
- Don’t remove your watch from the COROS app: once switched on, it goes back to factory settings (official).
- Already linked to a chest strap or a foot pod, the watch doesn’t offer broadcasting (official).
Sources: COROS, Broadcasting Heart Rate
Tried with MapulseAmazfit
The Helio Strap band, and watches on Zepp OS 3.0 or later (Balance, Active, GTR 4, GTS 4, T-Rex 3, Bip 6…).
Tried with Mapulse. Helio Strap tried with Mapulse: it broadcasts all the time, without pairing, even with the Zepp app open. For the watches, it’s reported. Real sessions in October 2026.
On the band or the watch
- In the Zepp app, open your device, then “Health Monitoring”.
- Check that “Heart Rate Push” is on.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- Some watches only broadcast during a workout (reported): if Mapulse finds nothing, start an activity and search again.
- Watches on Zepp OS 2 or older don’t broadcast (reported).
Tried with MapulseDecathlon
The Fit 100 watch.
Tried with Mapulse. Fit 100 tried with Mapulse. The setting comes from Decathlon’s manual, which puts it in each sport’s settings. Real sessions in October 2026.
On the watch
- Open your sport’s settings: the three dots next to its name.
- Turn on heart rate broadcasting.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- The setting is per sport: turn it on in the one you’ll use in the run.
Compatible according to the maker
The maker, or users, describe heart rate broadcasting. Not yet tested by us. The card says which models.
According to the makerGarmin
Models released since 2019: fenix 6 and later, epix, Enduro, MARQ, Forerunner 245, 255, 265, 570, 945, 955, 965, 970, Instinct 2 and 3, Venu, vívoactive 4 and 5. Not older models (fenix 5, Forerunner 235, 645, 935, vívoactive 3, Instinct 1): they only broadcast over ANT+.
According to the maker. From Garmin’s manuals. Not tried with Mapulse yet; users report that it works alongside Garmin Connect.
On the watch, for the run
- From the watch face, press START and choose your activity.
- Open the activity menu (≡), then its settings.
- Turn on “Broadcast Heart Rate”. The setting stays saved for this activity.
On the watch, to link Mapulse the first time
- Hold LIGHT to open the controls menu.
- Tap the heart rate broadcast icon, then START.
- Press STOP once Mapulse has found your watch.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- Nothing on the watch shows that it’s broadcasting during the activity: do a test before the day of your run (official).
- The menu name varies between models: look for “Broadcast Heart Rate” in your watch’s manual.
Sources: Garmin, Forerunner 965 manual
According to the makerPolar
Ignite 2 and 3, Pacer, Pacer Pro, Vantage M2, M3, V2 and V3, Grit X, Grit X2 Pro.
According to the maker. From Polar’s manuals. A test with Mapulse on a Pacer is still to be confirmed.
On the watch
- Press and hold OK in time view, then choose your sport.
- In pre-training mode, open the quick menu with the LIGHT button, then “Share HR with other devices” (Pacer). On a Vantage V3: sport settings, then “Heart rate”.
- Choose “Heart rate visible to all”.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- Stay in pre-training mode while Mapulse looks for your watch.
- Broadcasting is off by default and is set per sport: turn it on in the one you run with (official).
- Visible to all, your HR can be read by any app nearby (official). Mapulse only reads the device you chose.
Sources: Polar, Vantage V3 manual, Polar, Pacer manual
According to the makerHuawei
Watches and bands that offer the setting, for example Watch Fit 3, Band 8, 9 and 10, the GT range. Without the option, the watch can’t broadcast.
According to the maker. From Huawei’s help. A Watch Fit 3 has already connected to Mapulse, but no heart rate has arrived from it yet: turn the setting on before your run.
On the watch
- Open the app list, then Settings, then “HR Data Broadcasts”.
- Tap √ to turn it on. You can then start a workout: broadcasting carries on.
- To stop: side button, then √.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- While broadcasting, some watches disconnect from the Huawei Health app (official). Your data will sync afterwards.
- Watch 5 and Watch Ultimate 2: broadcasting only works in power saving mode (official).
Sources: Huawei, heart rate broadcasts
According to the makerFitbit
Fitbit Charge 6 and Fitbit Air.
According to the maker. From Google. Not tried with Mapulse yet.
On the band
- From the clock face, swipe down and tap “Broadcast HR”.
- Tap “Share”, then “Start”.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- A Charge 6 only accepts one connection at a time (official).
- If the band asks you to accept a pairing, accept it.
According to the makerPixel Watch
Pixel Watch 2, 3, 4 and 5.
According to the maker. From Google. Not tried with Mapulse yet.
On the watch
- From the watch face, swipe down to open quick settings.
- Tap “Connected Fitness”, then “Connect”.
- If Mapulse doesn’t find your watch: “Allow more devices”, then turn on “Extended pairing”.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- Google asks the receiving app to accept an encrypted pairing: accept it if the watch offers it. Not yet tested with Mapulse.
According to the makerHeart rate straps and armbands
Any strap or armband marked Bluetooth: Polar H10, Polar Verity Sense, Garmin HRM, Wahoo TICKR, Decathlon…
According to the maker. Standard Bluetooth profile. The simplest fallback when your watch doesn’t broadcast. We haven’t tried a chest strap yet.
On the strap
- Wet the electrodes and put the strap on: it switches on and broadcasts.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- An ANT+ only strap won’t work: look for the Bluetooth mention.
- Already linked to your watch, a strap can refuse Mapulse. The Polar H10 accepts two connections (official).
- If the strap cuts out during the run, Mapulse reconnects as soon as it broadcasts again.
ReportedOther Wear OS watches
Watches on Wear OS 6 or later, Pixel Watch included when it runs the Mapulse app.
Reported. Reported for another app with the same role. The Mapulse app hasn’t been tried on them yet, only on Galaxy Watch.
On the watch, just once
- Install Mapulse from the Play Store on your watch.
- Open it and accept its permissions (sensors, Bluetooth).
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- The Mapulse app needs Wear OS 6 or later: check the version in your watch’s settings. If it’s older, the app isn’t available.
- Do a long test, with the watch screen off, before your run.
Tricky or not supported
Broadcasting is missing, or needs a workaround: the card says which.
According to the makerSuunto
Race, Race S, Race 2, Vertical 2, with 2026 software. Not older models.
According to the maker. The feature is announced by Suunto; the menu path is reported by users. Not tried with Mapulse yet.
On the watch
- Update your watch from the Suunto app.
- Choose your sport mode, without starting the recording.
- On the start screen, turn on heart rate broadcasting.
In Mapulse, just once
- Go to Profile, then Watches & devices, then Add a device.
- Allow Bluetooth if Mapulse asks you to.
- Tap your watch or strap in the list, then “Continue”. Mapulse will reconnect to it for every run.
Good to know
- A dropout after about twenty minutes has been reported: do a test of at least an hour before relying on it.
Sources: Suunto, Vertical 2 release notes
According to the makerWithings
ScanWatch and the other Withings watches.
According to the maker. Withings replied on its forum that it has no plans to broadcast HR.
What you can do
- Wear a Bluetooth heart rate strap: see its page.
- Or run with the “Phone” source: your loved ones will follow your position, without HR.
Three ways, only one to follow
- Apple Watch: the Mapulse app on the watch sends your heart rate. With an iPhone only.
- Bluetooth: your watch or chest strap broadcasts its heart rate like a heart rate sensor, and your phone reads it while tracking your position.
- App on the watch: Wear OS watches that don't broadcast on their own, like the Galaxy Watch, get the Mapulse app, which makes them broadcast. After that, it's Bluetooth.
Each card says where its claims come from. "Tried with Mapulse": used in a real Mapulse session. "According to the maker": written by the maker in its manual, not yet tested by us. "Reported": said by users, to be taken as a lead.
Your watch isn't on the list?
If it can broadcast its heart rate over Bluetooth, it has every chance of working: look for "heart rate broadcast" in its manual. Otherwise, a Bluetooth heart rate chest strap will do, or your phone alone: your loved ones will follow your position, without heart rate. A question? Write to us from the support page. With an Apple Watch, see also what the watch adds.
